User's Manual
5
◆Working humidity: ≦80%
2.2FunctionOverview
◆Support Wi-Fi 2.4GHz 802.11b g/n, customizable support the Zigbee Protocol.
◆Support the Smart connection technology and the Apple’s HomeKit Accessory
Protocol.（Optional，Temporarily not supporting this feature）
◆Support cellphone connections and the connections through wireless routers, mobile
phone remote control via Wi-Fi/2G/3G/4G mobile network.
◆Control smart Outlets via phone and Tablet, and support set the timer switch.
◆Support electrical energy measurement, could know use quantity of electricity
through APP.
◆Support overloads protection function, when the electrical equipment which is
connected to the smart Outlet is out of the rated power range, the smart Outlet will
power off automatically.
◆Plug and play. Use and connections are simple. When smart Outlet power on, it can
be connected to the router automatically. Through the app, you only one step to
complete setting. You don’t need to set the IP address. After the first setting
successfully, you don’t need to set again, unless the router setting is to change.
◆Support Wi-Fi signal relay. The signal is strengthened beyond the coverage of Wi-Fi
signal. Multiple smart Outlets can be connected to each other. All of the powers of the
smart Outlets can be turned off by APP.
◆Support scenario settings. According to the different rooms or connective device’s
types, the smart Outlet can be classified and managed, such as management of
children's rooms. At most 10 smart Outlets interconnect.
◆Smart Outlet can be connected at least 10 personnel.
◆Multi-function control buttons. After pressing button in a short time, you can control
the smart Outlet switch. After pressing button in a long time, the smart Outlet will be
restored to the factory defaults and reconfigure the connection mode is entered.
◆The firmware of the smart Outlet can be upgraded by Wi-Fi.
◆Wi-Fi can be connected among the distance of 30 meters.
◆ The LED can display power supply status and connection status indication
◆ USB Port output 5V/1A.
◆ USB HOST, support extensions, allow you to connect USB webcam, USB
temperature and humidity detection equipment, air/smoke detection equipment,
infrared detection equipment. （Optional，Temporarily not supporting this feature）.
2.3SoftwareFeatures
◆After the power of smart Outlet is turn on, the smart Outlet can be connected to the
router automatically. According to the environment of the wireless router, the router
can be connected automatically through the app. If automatic connection is not
successful, you need to manually connect.