User's Manual
QuickStartGuide(ApplicabletoAC Adapter With WiFi,V1.3)
10/12
2multimedia server and wireless router.
The wireless multimedia server mode and wireless router mode can be enabled only
after the device is powered on. The mobile power supply mode and AC charging
adapter mode can be enabled only after the device is powered off.
Before enabling the wireless multimedia server mode or wireless router mode, users
should connect a notebook PC, tablet or smartphone to the device over WiFi.
The default wireless network of the device is named WiFiDGRJ-xxxx (xxxx indicates
the last four numbers of the physical address of the wireless network card in the
device). The default password is 11111111.
For detailed operation guide, see the instructions delivered with the product you
purchase.
2.1 Mobile Power Supply Mode
Insert the USB charging line of a mobile phone or tablet (or the nominal USB line of
WiFi AC Dongle) into either charging interface on both sides of this device when it is
in OFF state. The mobile phone or tablet can be charged in an emergency. The two
UBA interfaces for power outputs can have the charging current up to 1 A and 2.1 A
respectively. For quick charging, select the 2.1 A USB interface.
2.2 AC Charging Adapter Mode
This device provides 2 charging methods. Method 1 is to insert the two-phase
charging plug of the device into an AC socket. In this case, the device works in power
adapter mode and can charge external mobile terminals through the USB interface.
Method 2 is to connect the Micro USB interface of the device to a power adapter
(output current > 1 A) through the delivered USB line for charging.