User's Manual




6
Gree
n LED
sl
ow flash:
Every 2 seco
nds for
charging
Every 1.5 seconds for shutting down
WiFi LED (Blue) WiFi LED shows the sy
stem initiating
state:
Start flashing: Kernel loading in process
Stop flashing: System initiation
completes
Fast blinking: Reading or writing
Internet LED (Green) Internet LED state:
Extinguishin
g: No connection
Flashing: Connecting underway
Solid green: Connecting successfully
Micro SD card slot Support micro SD/SDHC,SDXC upto
2TB
Power button Power on/off switch button
Reset button Factory default rese
t button
WAN port
RJ45 100Mbit/s
USB device interface
Micro USB 2.0
USB host interface USB 2.0:
Support USB flash/HDD
Support 1.0A
output current charging
for iPhone
®
, smartphone.
Antenna Signal strength 2.5dBi (WiFi co
mponent)
17dBm (Main chip)
Ca
p
a
city 2600mA
h
Li-i
on Polymer battery
Battery
Charging current
Max 1.6A
Max power dissipatio
n
(tested with Micro SD
read/write without USB
storage activity)
* It will vary slightly with
different type of Micro SD
2W
Power dissipation
Standby po
wer (tested
with TOSHIBA 1TB
HDD,H DD slept during
the test)
1.5W
Environmental
requirem
ents
y Operating Temperature: 5°C to 35°C
y Non-Operating Temperature: 0°C to 60°C
y Operating Humidity: 5% to 90% (Non-con
densing)
y Non-operating Humidity: 5% ~ 90 % (Non-condensing)
Product dimension 73mm L x 53
mm W x 23mm H