User's Manual

Power 7 Technology Corporation – Wi-Fi SD/USB Users Manuals v2.1
6
Green Color
Steady Light: Battery is fully charged
Slowly Blinking: Battery charging
Blinking Fast: Device Shutting-Down
Red Color:
Steady Light: Less than 30% available power
Blinking Fast: Will soon shut-down, must be charged immediately
Wi-Fi LED:
Blue Color:
Flashing: Starts the Initialization process
Steady Light: Initialization process completed
Ready to use
Wi-Fi signal is normal
LED Off: The device is switched-off or no power
Internet LED:
Green Color: Good signal
No LED: No connection established
SD Read/Write LED:
White Color:
Flashing: Reading/Writing Data
Steady Light: Initialization process completed
Ready to use
6. Storage Installation
6.1 SD Memory Card
Note: Do not touch the exposed connectors on your SD memory card.
Installing the SD memory card is very simple. Locate the SD memory card slot. Simply insert the
memory card as seen on the image below. Gently push the memory card all the way in until it locks into