User's Manual

Power 7 Technology Corporation – Wi-Fi SD/USB Users Manuals v1.0
11
F) Modes: The default setting is 11b/g/n. You can also manually set the modes to
11Mbps (802.11b), 54MBPS (802.11G), and 150Mbps (802.11n).
G) Security: The default setting is Mixed WPA/WPA2-PSK. WPA-PSK and WPA2-PSK
are also available.
H) Password： The default password is set to 11111111.
I) IP Address： The default IP address is set to 10.10.10.254 with subnet mask of
255.255.255.0. The IP address can be changed.
4. Click on the “Next” button. The next step is to change the admin default password. Click on the
“Next” button once the password has been modified. You may click on the “Skip” button to keep the
default password.
5. Click on the “Finish” button to complete and save the changes made.
The system will start rebooting. This process will take approximately 5 minutes as seen on the
image below.