User's Manual

Power 7 Technology Corporation – Wi-Fi SD/USB Users Manuals v1.0

By selecting the WAN option, the Dynamic IP is selected as the default setting. You can

manually assign your own IP address by clicking on the green arrow and select the Static IP

option.

Click on the “X” button if you wish to cancel and exit this window.

3. Click on the “Next” button. The next step is to configure the Wi-Fi Disk.

• SSID： Type-in the combination of letters and numbers only. 32 characters is the

maximum allowable SSID length

• Channel： The default setting is set to Auto. There are 14 available channels to

choose from.

• Modes: The default setting is 11b/g/n. You can also manually set the modes to

11Mbps (802.11b), 54MBPS (802.11G), and 150Mbps (802.11n).

• Security： The default is set to NONE. The WPA-PSK, WPA2-PSK , Mixed

WPA/WPA2-PSK are available.

• Password： WPA-PSK , WPA2-PSK , Mixed WPA-PSK/WPA2-PSK: Minimum 8

(Maximum 63) characters.

• IP Address： The default IP address is set to 10.10.10.254 with subnet mask of

255.255.255.0. The IP address can be changed.

4. Click on the “Next” button. The next step is to change the admin default password. Click on the

“Next” button once the password has been modified. You may click on the “Skip” button to keep the

default password.