Application Guide

TROUBLESHOOTING STEPS

-The battery must be upright while charging.

-The battery itself does not include a charger. Please use the charger that was included with your Power

Wheels® vehicle to charge the battery.

-Plug the charger connector into the socket in the battery.

-Plug the charger into a standard wall outlet. Note: Use the charger only in a wall outlet. Do not plug the

charger into a ceiling outlet. If power flow to the wall outlet is controlled by a switch, make sure the

switch is ON.

-Before first time use, charge the battery for at least 18 hours. Never charge the battery longer than 30

hours.

-Recharge the battery after each use of your vehicle for at least 14 hours.

-Once the battery is charged, remove the charger connector from the battery socket. Unplug the charger

from the wall outlet. The battery is now ready to be installed in your vehicle. Please refer to the vehicle

Owner's Manual for instructions to install the battery in your vehicle.

PAGE 1
TROUBLESHOOTING STEPS -The battery must be upright while charging. -The battery itself does not include a charger. Please use the charger that was included with your Power Wheels® vehicle to charge the battery. -Plug the charger connector into the socket in the battery. -Plug the charger into a standard wall outlet. Note: Use the charger only in a wall outlet. Do not plug the charger into a ceiling outlet. If power flow to the wall outlet is controlled by a switch, make sure the switch is ON.