Owner's Manual Owner's manual

9
Controls and Features



Start Button (green)



Starts the washing action and starts the timer. Your Power Soak sink will run continuously
after this button is pressed.

Stop Button (red)



Stops the washing action and resets the timer.



Starting and stopping the wash action



To start the wash action, press the green “START” button. A strong “rolling” wash action
should be present.
To stop the wash action, press the red “STOP” button.



Introducing Pots and Pans to the PowerSoak
Dirty pots and pans should be brought to the Power Soak in a timely manner. Do not allow
items to sit and air dry. The quicker that items are brought to the Power Soak and put in
the wash tank, the easier they are to clean!



Properly Scrapping Pots and Pans



Excess soils should be removed from the pots and pans prior to dropping them in the wash
sink.
Deposit the excess soils into a garbage can.
Some systems may have an optional pre-scrapping area with a pre-rinse spray. If so, soils
may be deposited into the scrapper sink.