Owner's Manual Owner's manual

20
Prior to calling, please note the “Error Code” (if any) that can be identified
by observing LED #2 on the UPM. If there is a control logic error, LED #2
will flash with a “blinking” pattern. The definitions for the patterns are as
follows:
Please have this “Error Code” information available prior to calling Power
Soak Systems.
“
_
“ symbol represents a “ long ” flash
“
.
” symbol represents a “ shor t ” flash
3 long & 1 short _ _ _
.
= Liquid L ev el
Error
3 long & 2 short _ _ _
. .
= T emperatur e Sensor Error
3 long & 3 short _ _ _
. . .
= Over-Current Error
3 long & 4 short _ _ _
. . . .
= Over Temperature Error
3 long & 5 short _ _ _
. . . . .
= Current Sensor
Error
3 long & 6 short _ _ _
. . . . . .
= Membrane
Error