MSDS

Revised: November 15, 2012
Supersedes: November 1, 2011
POWER SERVICE DIESEL 9•1•1
Page 5 of 9
ENGINEERING CONTROLS: The level of protection and types of controls necessary will vary
depending upon potential exposure conditions. Local exhaust ventilation is recommended to
control exposure.
PERSONAL PROTECTIVE EQUIPMENT (PPE):
Eyes and Face: Eye protection such as safety glasses or chemical goggles is
recommended if contact is likely.
Skin: If prolonged or repeated skin contact is likely, chemical/oil resistant clothing and
gloves are recommended. Wear additional protective clothing as appropriate.
Respiratory: Wear a NIOSH/MSHA approved respirator as necessary.
Specific Hygiene Measures: Always observe good personal hygiene measures, such
as washing after handling the material and before eating, drinking, and/or smoking.
Routinely wash work clothing and protective equipment to remove contaminants.
Practice good housekeeping.
NOTE: These precautions are for room temperature handling.
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL FORM: Liquid
COLOR: Straw Yellow
ODOR: Strong Solvent
POUR POINT: -65°F (-54°C)
BOILING POINT: 200°F (93°C) est.
VAPOR PRESURE (psi): .58 est.
VAPOR DENSITY (AIR = 1): >3.0 est.
pH: 7-8 slightly basic
SPECIFIC GRAVITY (at 60
°
F): 0.84
SECTION 10 - STABILITY AND REACTIVITY
CHEMICAL STABILITY:
This material is considered stable under normal ambient and anticipated storage and handling
conditions of temperature and pressure.
CONDITIONS TO AVOID:
Flames, high energy ignition sources, and elevated temperatures.
MATERIALS TO AVOID: