Daim Ntawv Qhia Tus Neeg Siv

Assembly descriptions
Indicator descriptions
When the bike trainer is powered on, the indicator will light red first to indicate that the
control panel is conducting self-diagnostics and auto zeroing. When the indicator is
blinking green, it means the control panel has finished self-diagnostics and auto zeroing
and is entering standby mode to get ready for riding.
No. Indicator status Status description Notice and remark
1 Red Control panel self-
diagnostics and auto
zeroing in progress
• Normally, the process will
complete in 2-4 seconds after
it is powered on.
• Please DO NOT use the bike
trainer before auto zeroing
and self-diagnostics are
completed to avoid power
measurement deviations.
2 Blinking green
Self-diagnostics and
auto zeroing completed
Can connect to software.
3 Solid green Bluetooth is connected Connected to a Bluetooth device
and paired successfully.
4 Blue The bike trainer is
active and providing
power normally
When connecting to Bluetooth or
ANT+ devices, it will light blue
during riding.
Specifications
Dimensions (installed) 620 x 518 x 453 mm
Total Weight (unboxed) 16.5 KG
Flywheel Weight 5.7 KG
Sound Level 52 dB (@30KPH)
Max Power Output 2500 W
Max Simulated Incline 20%(@70KG)
Accuracy ±1.5%
Drivetrain
Cassette not included.
Requires purchase/installation of new cassette: 8/9/
10/11 Speed SRAM/Shimano
Connectivity ANT+, ANT+ FE-C, and Bluetooth Smart
Firmware Upgradable Yes
Electrical Requirements 100 - 240 Volt, 1.5 A, 50 Hz - 60 Hz
Box Dimensions 598 x 275 x 565 mm
EN
EN-9