Daim Ntawv Qhia Tus Neeg Siv

Assembly descriptions

Mounting your bicycle

Shift the chain on your bicycle to the smallest sprocket of the cassette and then remove

the rear wheel. Align the bicycle chain with the smallest sprocket of the cassette and

then put on the chain as well as mount the bicycle on TRAINER's axle to have the

bicycle in a suitable position for riding.

Please use the bicycle quick release lever properly with care. When the arc of the

rotating arm of the quick release lever is toward outside, it means the lever is in a

released state. Rotate the rotating arm of the lever clockwise to tighten the quick

release lever. The rotating arm of the quick release lever should be placed on the other

side of the TRAINER's cassette.

Please refer to the following figure for the installation of the thru axle bicycle. Insert the

thru axle from the other side of the cassette and tighten the axle.

Attention:

Please firmly tighten the quick release lever and the thru axle to

prevent damage to property or human body. If you cannot tighten

the quick release lever and the thru axle, please contact your dealer

or POWERPLUS customer service. Please DO NOT attempt to use

the TRAINER in this situation.

When mounting the bicycle, please lift its front wheel and press the

frame down to make the bicycle firmly mounted on the TRAINER.

EN-8