POWERPLUS TRAINER POWERPLUS BIKE TRAINER Quick Start Guide V3 \ V6
This appliance can be used by children aged from 14 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Only use the power adapter certified by the POWERPLUS TRAINER.
T ABLE OF C ONTENTS Knowing your V3 ..................................................................................... ……………..1 Package contents ................................................................................................... ..1 Introduction of product appearance ......................................................................... ..2 Assembling the POWERPLUS V3 ........................................................................... ..3 Knowing your V6 ....................
Knowing your V3 EN KNOWING YOUR V3 Package contents POWERPLUS V3 bike trainer main unit Bolt x4/ Nut x4 Quick release kit Open-end wrench Power adapter Adapter A – for quick release cassette nut Adapter B – for quick release 130mm/135mm Adapter C – for thru axle cassette nut Adapter D – for thru axle 12x142/ 12x148mm Note: Accessories may vary by country or region.
Knowing your V3 Introduction of product appearance EN EN-2
Assembling the POWERPLUS V3 1. Flip the box and open the bottom of the box. Take the POWERPLUS V3 main unit and Styrofoam packaging out of the box at the same time. 2. Remove the front and rear bottom tubes from the sides of the Styrofoam packaging. (DO NOT open the Styrofoam packaging at both sides.) 3. Take out the bolts and insert them into the bolt holes on the main frame. 4. Put the front and rear bottom tubes on the main frame, then push the bolts into bolt holes. 5.
Knowing your V6 EN KNOWING YOURV6 Package contents POWERPLUS V6 bike trainer main unit Front bottom tube Rear bottom tube Bolt x2 / Nut x2 1.8mm cassette washer Power adapter Tuning knob – for front/rear bottom tubes adjustment and tightness Quick release kit Open-end wrench Adapter A – for quick release cassette nut Adapter B – for quick release 130mm/135mm Adapter C – for thru axle cassette Note: Accessories may vary by country or region.
Knowing your V6 Introduction of product appearance EN LED indicator Tuning knob Flywheel Front bottom tube EN-5 Power cord connector
Assembling the POWERPLUS V6 • Flip the box and open the bottom of the box. Take the POWERPLUS V6 main unit and Styrofoam packaging out of the box at the same time. • Remove the front and rear bottom tubes from the sides of the Styrofoam packaging. (DO NOT open the Styrofoam packaging at both sides.) • Take out the bolts and insert them into the bolt holes on the main frame. • Put the front and rear bottom tubes on the main frame, then push the bolts into bolt holes.
ASSEMBLY DESCRIPTIONS Attaching the cassette (sold separately) • Attaching a compatible 11-speed cassette Attach the cassette onto the cassette body manually and use the cassette nut to secure it on the cassette body. Use the cassette removal socket to secure it tightly on the TRAINER cassette body (the tool is not included). • Attaching a 9-speed or 10-speed cassette Before attaching a 9-speed or 10-speed cassette, you need to put the 1.
Mounting your bicycle Shift the chain on your bicycle to the smallest sprocket of the cassette and then remove the rear wheel. Align the bicycle chain with the smallest sprocket of the cassette and then put on the chain as well as mount the bicycle on TRAINER's axle to have the bicycle in a suitable position for riding. Please use the bicycle quick release lever properly with care. When the arc of the rotating arm of the quick release lever is toward outside, it means the lever is in a released state.
Assembly descriptions Indicator descriptions EN When the bike trainer is powered on, the indicator will light red first to indicate that the control panel is conducting self-diagnostics and auto zeroing. When the indicator is blinking green, it means the control panel has finished self-diagnostics and auto zeroing and is entering standby mode to get ready for riding. No.
SAFETY PRECAUTIONS AND REGULATIONS Safety precautions before use 1. Specs of the POWERPLUS TRAINER power adapter are as follows: • Input: 100 ~ 240 VAC / 1.5 A • Output: 19 VDC / 4.7 A • Power plug: External diameter 5.5 m/m; internal diameter 2.5 m/m; length 10~12 m/m 2. Only use the power adapter certified by the POWERPLUS TRAINER. Noncompliant power adapters will cause irreparable damage to the bike trainer. 3.
Safety precautions and regulations EN 20. If any of the adjustment devices are left projecting, they could interfere with the user’s movement. 21. Class B and class C crank training equipment are not suitable for high accuracy purposes. 22. Risk caused by spinning pedals and/or exposed flywheel with the absence of a freewheel system. 23. The maximum user body mass is 120kg. 24.
Safety precautions and regulations Disclaimer Attention! POWERPLUS shall not be held responsible for temporary or permanent injury to the user out of using the POWERPLUS TRAINER (either directly or indirectly). Maintenance and care 1. When cleaning the bike trainer, please use neutral lubrication oil. DO NOT use corrosive detergents. 2. DO NOT burnish the surface of the bike trainer or drill holes. Scratches or drilled holes will lead to occurrence of cracks. 3.
CE Compliance Statement 2402 MHz ~ 2480 MHz, power: -0.81 dBm This device meets the EU requirements and the International Commission on NonIonizing Radiation Protection (ICNIRP) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. This equipment should be installed and operated to ensure a minimum of 20 cm spacing to any person at all times.
Safety precautions and regulations EN If POWERPLUS repairs or replaces the product, the repaired or replaced product shall continue to be warranted for the remaining time of the original warranty period or for three (3) months from the date of repair or replacement, whichever is longer. 7. Before returning any units for service, be sure to back up data and remove any confidential, proprietary, or personal information from the Product. POWERPLUS is not responsible for damage to or loss of data. 8.
BIKE POWER TRAINER Product Warranty Please retain the original purchase receipt or approval in order to protect your right of free warranty service. Serial Number Purchase Date Dealer stamps Thank you again for purchasing the POWERPLUS. POWERPLUS reserves the right to design, change specifications, and improve quality. Should you have any questions regarding use of the bike trainer, please visit our website at: www.powerplusco.
SOFTWARE COMPATIBILITY ZWIFT System Windows MAC OS IOS/Android Connection Way ANT Key Bluetooth with Zwift Companion Bluetooth Bluetooth NOTE: Windows system connected by Bluetooth needs to use Zwift Companion with the same Wi-Fi circumstance with computer. ROUVY System Windows MAC OS IOS/Android Connection Way ANT Key Bluetooth Bluetooth NOTE: 1、 Android system is suggest to connect to RouvyAR app to get the best experience .
