User manual

5.7 BATTERY DATA DISPLAY
Use the "MODE-/ESC" buttons to switch between the data
in the menu. This screen shows all relevant data concer-
ning the charger and battery.
The table summarises all the of the Parameters that may
be used.
18
Parameter Explanation
Input voltage Display of the supply voltage
Output voltage Display of the current battery voltage
Battery temperature Instantaneous battery temperature
Maximum temperature Maximum battery temperature
Charge time Last charge time
Discharge time Last Discharge time
Internal resistance Internal resistance of the battery
5.8 CYCLE DATA DISPLAY
Use the "MODE-/ESC" buttons to switch between the data
in the cycle menu. All relevant data can be seen here for
the charge-/discharge process.
The Charge (C) or Discharge (D) lines display the both
the charged-in or discharged capacity of the battery.
Additionally, the "C" line will display the highest voltage and
the "D" line the average battery voltage.
To be able to see all cycle data (up to 10 possible), press the "DEC" or "INC buttons to
select the required cycle.
Operating Instructions
Power Peak
®
Twin EQ-BID
the
"
D
"
line the average batter
y
# 30 8563
52