User manual

Operating Instructions

Power Peak

B6 EQ-BID

8.5 CHARGING/DISCHARGING WITH BID CHIP/KEY

First connect the BID chip/key via the adapter lead

or directly to the charger. The display shown oppo-

site then appears.

If the charging parameters on the chip are OK, press

the ENTER button to prepare the charging/dischar-

ging process. The further procedure is identical

to that used for a manual start. This procedure is

described in Section 7.4.

While charging or discharging, the most important data are stored on the chip/key.

9. END OF CHARGING/DISCHARGING

The charger automatically finishes a charging or discharging operation precisely at the

correct time. The processor takes into account the charging parameters. The optimum

process is used for each type of battery.

9.1 DISPLAYING THE CHARGING/DISCHARGING DATA

The corresponding values are conti-

nuously shown in the working display

during a charging or discharging operation

(see Section 5.2).

Successful conclusion of the charging pro-

cess is signalled acoustically. As shown in

the illustration opposite, the most impor-

tant data are shown in the display.

Status display

GMBTIJOHA'GJOJTI

Battery type

Actual battery

voltage

Charge /

discharge

current

Elapsed char-

ge / discharge

time

Charged-in

or discharged

capacity

# 30 8561