User manual

Operating Instructions
Power Peak
®
B6 EQ-BID
8
5. STARTING UP THE CHARGER
Connect the charger to a 12 V lead-acid bat-
tery or to the power supply unit. Ensure cor-
rect polarity when connecting (red = positive/
black = negative).
After briefly showing the device name and
the version number of the software, the start
screen appears in the display.
5IFMBOHVBHFTFMFDUJPONFOVBQQFBSTJGUIFuACVU-
ton is pressed and held while connecting the supply
voltage.
The menu language can then be selected from this
display. The available languages can be selected
POFBGUFSUIFPUIFSXJUIUIFuAPSuACVUUPO5IFGPM-
lowing languages are available:
t (FSNBO
t &OHMJTI
t 'SFODI
Language selection must be concluded by pressing the ENTER button. The start display
shown above will then appear.
With a corresponding software update, the following languages can also be set:
t *UBMJBO
t 4QBOJTI
5.1 SETTING THE UNIT OF TEMPERATURE
To change the unit of temperature from °F to °C,
QSFTTBOEIPMEUIFuACVUUPOXIJMFTXJUDIJOHPO5IF
display shown opposite will then appear. The requi-
SFEVOJUDBOOPXCFTFUXJUIUIFuAPSuACVUUPO1SFTT
ENTER to confirm the entry.
5.2 WORKING DISPLAY
This display provides the user with all the necessary
information during a charging or discharging opera-
tion. The status display shows the type of operation
(C for charging, D for discharging, F for finish and
alternately C/B for balancing lithium batteries) on
the top line. The charged or discharged capacity
and the time elapsed since the start are also shown
on the top line. The type of battery (NC for nickel-
cadmium battery, NM for nickel-metal battery, LP
for lithium-polymer battery, Li for lithium-ion battery, LF for lithium-ferum battery and Pb
12V
230V
230V /12V
Time
elapsed
Charging or
discharging
current
Current
battery
voltage
Battery
type
Status
Capacity
# 30 8561
40