User manual

Operating Instructions

Power Peak

B6 EQ-BID

STOP / ENTER BUTTON

t "DVSSFOUPQFSBUJPOFH$)"3(&DBOCFUFSNJOBUFECZQSFTTJOHUIF4501CVUUPO

t 5IF&/5&3CVUUPODPOGJSNTBTFMFDUJPOFHBDUJWBUJPOPSEFBDUJWBUJPOPGBTFMFDUFE

menu.

DATA VIEW BUTTON

t 4IPXTUIFDIBSHFSEBUBFHJOQVUWPMUBHF1SFTTJOHUIJTCVUUPOBMTPTIPXTBMMJOEJWJEVBM

cell voltages of a connected LiPo battery pack .

All buttons have an Autorepeat function so that the respective function is repeatedly

switched when the button is held pressed.

INTEGRATED ACOUSTIC GENERATOR

t 5IFQJF[PCV[[FSQSPWJEFTDPOGJSNBUJPOFBDIUJNFBCVUUPOJTQSFTTFEBOEBDPVTUJDBMMZ

signals the end of charging/discharging as well as a fault.

4. SPECIFICATION

Operating voltage: 12 V DC (car battery)/230 V AC mains operation

(Do not use battery charger for car batteries!)

Number of cells: 1 ... 14 cells NC/NiMH,

1 ... 6 cells LiIo (3.6 V), LiPo (3.7 V), LiFe (3.3 V)

1 ... 6 cells (2...12 V) lead battery

Charging current: 0.1 ... 5 A at max. 50 W

Discharging current: 0.1 ... 1 A at max. 5 W

Equalizing current: max. 300 mA

Charging power: 50 W, current is controlled accordingly

e.g. 24 V battery voltage, charging current approx. 2.0 A

Discharging power: 5 W, current is controlled accordingly

e.g. 4.8 V battery voltage, discharging current approx. 1.0 A

Trickle charge: Charged capacity <1 Ah: No trickle charge

 $IBSHFEDBQBDJUZ"I5SJDLMFDIBSHFBU$

(only NC and NiMH)

Cut-off voltae: 0.8 V per cell for NC and NiMH,

3.0 V per cell for LiPo, Lilo

2.5 V per cell for LiFe

1.8 V per cell for lead batteries

Charge termination:

NC/NiMH: Automatic, digital Delta-Peak system

Lead and lithium: Automatic, voltage-dependent, CC-CV method

Dimensions: 142 x 89 x 25 mm

Functions: Charge, discharge, discharge-charge, balance

10 internal storage locations

# 30 8561