Use and Care Manual

Part IV: Maintaining The Thencher
15
PART IV: Maintaining Your Trencher
Regular maintenance is the way to ensure the best performance and long life of your
machine. Please refer to this manual and the engine manufacturer's user manual for
maintenance procedures.
Maintenance Safety
NOTICE
A. Before performing any maintenance procedure or inspection, stop the engine, wait five
minutes to allow all parts to cool.
B. Disconnect the spark plug wire, keeping it away from the spark plug. Disconnect the
Battery Terminals (Electric start only).
C. Stop engine before removing fuel cap.
D. Use only genuine replacement parts of the engine manufacturer.
Regular Maintenance Checklist
Procedure Before Each Use Every 3
Hours
Every 25
Hours
Every 100
Hours
Check engine oil level
Check general equipment
condition
Check wedge for sharpness
Grease surface of slide rail
Check belts
Grease rack and pinion
Check tire pressure
Clean engine exterior and
cooling
Change Engine Oil First time
5hours
Replace air filter
Replace spark plug
Engine Service
Refer to the engine manufacturer’s user manual for engine maintenance.