Use and Care Manual

QVTOOLS, LLC | 2731 CRIMSON CANYON DRIVE, LAS VEGAS, NV 89128
POWERKING 1-800-344-3371 [e-mail]
reason including cleaning, servicing, transporting, or inspecting the stump grinder.
Never deviate from this procedure unless instructed in this manual or in an
emergency that requires it.
WARNING! A rotating cutting wheel is very dangerous. Stand at controls and
ensure that the cutting wheel comes to a complete stop before doing anything else.
1. Move the engine throttle to the slow position.
2. Push the emergency (on/off) switch to stop the engine.
3. Set park brake before leaving controls.
Emergency Shutdown Procedure
1. Immediately press the emergency (on/off) switch to stop the engine.
2. Be sure to allow all moving parts to come to a complete stop.
3. Pull the brake lever to engage the brake.
4. Rectify the emergency situation and return to normal operation.
Emergency Stop Reset
Reinstall emergency stop pull and twist the palm stop switch to the right. Palm stop
switch will pop up when reset.
Maintenance
❏ Make sure all nuts, bolts, and screws are tightened.