Use and Care Manual

QVTOOLS, LLC | 2731 CRIMSON CANYON DRIVE, LAS VEGAS, NV 89128
POWERKING 1-800-344-3371 [e-mail]
from the stump and rake away the chips. It is also possible to use the
cutter wheel to push chips off the the side.
❖ In order to prevent any of the wheels becoming stuck in the hole.
Move the grinder to the other side of the stump to continue
removal or by filling the hole with chips before continuing.
You will want to prepare the grinder at the stump by placing it into position
with the cutting wheel near the top edge of the stump. (See image below)
Removing Roots
1. Make sure the throttle is set to fast. The cutter wheel will accelerate to cutting
speed.
2. Swing the cutting wheel to one side, then lower it into the nearest roots that
are buried at the foot of the stump.
3. Swing the cutting wheel before each sweep until the roots are sufficiently
removed.