Use and Care Manual

QVTOOLS, LLC | 2731 CRIMSON CANYON DRIVE, LAS VEGAS, NV 89128
POWERKING 1-800-344-3371 [e-mail]
Cutting Teeth
To ensure prolonged life and reliability, we recommend to torque the cutting teeth
bolts to 60 ft lbs before each use.
Belts
To tension the belts, loosen the 4 bolts that hold the engine to the frame. Turn the
tensioning rod on the back of the unit to slide the engine forwards or backwards to
properly tension the belts. Once tensioned, tighten the bolts. The tension of the belts
should be about 0.5in deflection.
Specifications
Stump Grinder
❖ Diameter of Cutting Wheel: 11.8"
❖ Cutting Wheel Thickness: 3.5"
❖ Cutting Depth Below Ground:11"
❖ Cutting Depth Above Ground: 14"
❖ Machine Width: 29.9"
❖ Teeth: 9pcs
❖ Tire Size: 145 / 70 - 6
❖ Brake Type: Drum
❖ Belts: 2 x B54 V-Belt
Engine
❖ Engine Type: Kohler CH440 4-Cycle Commercial
❖ Displacement: 429cc