5 TON LOGSPLITTER MODELS PK0304 / PK0305 / PK0306 Owner’s Manual and Operation Instructions
！ OPERATION INSTRUCTIONS Proper Operation of the Log Splitter as per instruction labels on machine 1.) Load a log onto the splitter and against the wedge. 2.) Serious accidents can happen when other people are allowed inside the work zone. Keep everyone else out of the work zone while operating control valve. 3.) Make sure hands are clear of crush hazard zones. 4.) Push control valve handle to bottom postion(FIRST SPLIT) to split logs.
！ OPERATION INSTRUCTIONS FOR SPLITTING FOR TOWING 3
！ ！ ！ MAINTENANCE AND STORAGE Before performing maintenance, the log splitter must be placed in maintenance mode. 1.) Turn off engine. 2.) Release the control valve handle to relieve hydraulic pressure. After performing maintenance, make sure all guards, shields, and safety features are put back in place. Failure to follow this warning can result in serious injury. Refer to the engine owner’s manual for engine maintenance.
TROUBLESHOOTING Problem Cylinder rod will not move SOLUTION: A,D,E,H,J Slow cylinder rod speed when extending or SOLUTION: A,B,C,H,I,K,L retracting Wood will not split or splits extremely slowly SOLUTION: A,B,C,F,I,K Engine bogs down during splitting SOLUTION: G,L Engine stalls under low load condition SOLUTION: D,E,L,M Cause Solution A-Insufficient oil to pump Check oil level in reservoir B-Air in oil Check oil level in reservoir C-Excessive pump inlet vacuum Check pump inlet hose for blocka
COMPONENTS IN PACKAGE 6
ASSEMBLY Open Shipping Box 1. Set the shipping Box on a solid, flat surface. 2. Carefully open the shipping box and take out the separate parts from the box make sure all parts included refer to the page COMPONENTS IN THE PACKAGE 3. Locate all hardware before beginning assembly.
Step 5: Fix cylinder and hydraulic pipe Step 6: Fix hydraulic pipe Move the cylinder to the end and fix by hex self-locking nut M8 Assemble hydraulic pipe A, one end on pump (OUT),another end of valve (P) Assemble the two hydraulic pipe B on valve and cylinder Step 7: Attach safety Guard Step 8: Attach log cradle Assemble control valve operating handle fix by hex self-locking nut M8, washer φ8,spring washer φ8 Assemble safety guard fix by screw M6x12 Assemble handle grip Assemble cradle on support fi
EXPLODED VIEW AND PARTS 9
No. Description Qty No. Description Qty 1 Body 1 40 Cylinder 1 2 Screw M10x70 1 41 Hydraulic Pipe B 2 3 Flat Washer φ10 27 42 Hex Screw M8x60 2 4 Hex Bolt M10x45 6 43 Valve Connector M20x1.5-M18x1.5 2 5 Pusher 1 44 Gasket 20 4 6 Hex Nut M10 12 45 Hollow Bolt M20x1.
QVTOOLS, LLC. Warranty Statement QVTOOLS, LLC warrants all gas power equipment 1 year for manufacture defects, Kohler engine 3 years from date of purchase. Proof of purchase date required for warranty repairs. Keep your receipt. QVTOOLS, LLC will provide parts and labor of Powerking products only at our approved service centers, Customer is responsible for delivery and pickup of the product to and from the service center.
