Replacement Part List

22
to vibration.
Check v-belt tension, wear and that it is running true,
adjust or replace as required.
Vibrator Oil Check
1.
Place the plate compactor horizontally on flat surface.
Make sure the compactor is level when checking the oil in
the vibrator assembly.
1.
Check vibrator oil level by removing the plug (vibrator
oil gauge) as shown in Fig-17.
The oil level should be up to the oil plug .If oil is
required, replace using SAE motor oil, as suggested in the
table Fig-1.
2.
When changing the vibrator oil, remove the drawn
Plug (Fig-17), and simply tip the compactor to drain the oil.