Replacement Part List

vibrating plate by Shock absorbing Rubber. The lower part is made

up of Vibrating plate and Vibrator unit that has an Eccentric rotary

shaft built in. The power source is transmitted from the centrifugal

clutch on engine output shaft to the Eccentric rotary shaft via V-belt.

Power Transfer

Air-cooled single cylinder engine is amounted as power source and

centrifugal clutch is fixed on engine output shaft. Centrifugal Clutch

engages by running up the engine and engine R.P.M is reduced to

suitable number for compacting. The rotation of engine is

transmitted from V-pulley integrated with Clutch drum to Vibrator

Pulley through V-belt. Vibrator pulley rotates Eccentric rotor shaft

that is contained from eccentric rotor is transmitted to Compaction

with the weight of the machine makes the compaction of the ground

possible.

FUNCTION AND CONTROLS

Engine

The engine is controlled by an ON/OFF switch or push button which

is mounted on the motor below the fuel tank.

The motor speed is controlled by a remote throttle lever which

is mounted on the machine handle.

Drive belt

Tension of the drive belt is adjustable. Loosen the four nuts on the