Replacement Part List

Steer the machine by moving the handle sideways

to the right or left.

ALWAYS maintain good footing so that you do not

slip and lose control when starting or operating the

machine.

Prior to operation

1-1.

Make sure that all dirt, mud, etc., are thoroughly removed

from the unit prior to operation. Special effort should be given

to the button face of the vibrating plate and those areas

adjacent to the cooling air inlet of engine, carburetor, and air

cleaner.

1-2.

Check all bolts and screws for tightness and make sure all

bolts and screws are securely tightness. Loose bolts and screws

may cause damage to the unit.

1-3.

Check the V-belt for tightness. The normal slack should be

approximately (1/2”) when the belts are forcibly depressed in

the middle position between the two sheaves. If there is excess

belt play, there could be a decrease in the impact force or

erratic vibration, causing machine damage.

1-4.

Check the engine oil level and if the engine oil level is low, it

should be refilled. Use the proper motor oil as suggested in the

table below.(Fig-1)