User's Manual


3. Insert the SIM car to the slot as shown below.
4. Insert Micro-SD card, open Micro-SD card holder and insert Micro SD card
into the slot, then close the holder as shown below.
5. Insert the battery to the phone: Insert the battery with the label side up. Align
the tabs and metal contacts at the bottom of the battery with the tabs and
contacts on the back of the phone. Slide into place and press down as shown.
6. Insert the battery cover, insert the back cover and rotate two screws clockwise
to lock the back cover as shown below.
7. Charge the battery

before using your device for the first time, please recharge the
battery completely 12 hours.
8. To power your device on and off, press and hold power button for 1-2seconds.
Attention:
Make sure battery cover, screw, I/O port rubber are completely sealed for
waterproof and dustproof.
Use USB storage:
Connect the phone with computer by USB cable, the computer will pop up the
windows to let you install the phone USB driver. Choose USB connectedÆturn
on USB storage to use the USB storage.