User's Manual

10.3 security settings
SIM lock: this function can prevent others from using
your SIM card without your permission. After the SIM
card PIN code is activated, correct PIN code must be
input every time when the mobile phone is powered on;
otherwise you can only make emergency call.
Note:
PIN code is the operating password and relative
with the SIM card. The SIM card will be locked, if the
PIN code is wrong for 3 consecutive times. At this
time, you need the PUK code to unlock the SIM
card. The PUK code may be provided for you
together with the PIN code and the SIM card. If not,
please contact your network provider.
Phone lock
This function is to lock the phone and prevent other
people from using the mobile phone without
permission (default password is 0000).
Auto keypad lock
After this function is activated, when the phone is in
standby status and without any operation, the keypad
will be locked automatically after the set time. Then the
standby screen will show keypad locked icon. At the
left bottom corner of the screen, word of Unlock will
appear. If you need to unlock the mobile phone, you
can press left key and “*” key
Fixed dial: after the function is activated, the mobile
phone is only allowed to be used to dial the telephone
numbers existing in the list. To turn on the function, you
need to input your PIN2 code. Please consult your
network service provider for specific situations.
Note:When the Fixed dial function is active, the function
of SIM card will be restricted, such as dial call, send
SMS, and send MMS and so on.
Barred dial: this function needs to be supported by SIM
card. Please consult your network service provider for
specific situations.
Change password: you can change the password of
SIM PIN and SIM PIN2 through the system prompts
10.4 Connectivity
GSM data: you can choose to edit the GSM account,
numbers, user name,password line type,speed,primary
DNS etc.
GPRS:you can choose to edit the GPS account name,
GPRS APN, user name, pass word,Auth.type, primary
DNS something.
10.5 Restore factory settings
Enter into the restore factory settings, the mobile phone
will prompt you to input password (default password is
1122). You can carry on corresponding operation after
inputting the correct password.
After running the Restore factory settings, the
environment setup (e.g. user profile) restore to factory
default setting.
10.6 Sound effect
Select different sound effect to playback the MP3.
10.7 File manager
Enter into file manager, then the interface shows phone
and memory card (memory card is inserted in the
phone). At the top of the interface, the capacity and
surplus capacity of the phone or memory card are
displayed. The following operations are available:
Select Phone or Memory card to open, format, rename
or check details of the folder; Opening one of the
folders, you can conduct Open/play, New folder,
Rename, Delete, Sort by, etc. Enter one of the folder
you can conduct Play, send to Bluetooth, Use as
ringtone or wallpaper, New folder, Rename, Delete,
Sort by, Mark several, Copy, Move, Delete All, Details
checking, etc.
Note: Files to be transmitted shall be the same
format as that supported at
destination,or,sending may fail.
11—Multimedia
11.1 Enter the media player interface; activate Options,
then you can operate as follows:
Play:Play the current video file.
Send:send the selected video file.
Rename:Rename the selected video file.
Delete:Delete the current video file.
Delete all files: Delete all video files listed.
Array: Array the video files listed.
Storage:to set where to store the current video file.
When there's no any file in the list, it shows only the
storage.
Note: only the video files that saved in “Videos” folder
can be played.
11.2 Audio Player
Enter the media player interface; activate Options,
then you can operate as follows:
Play: play the current audio file.
Details: check the details of the file.
Add to ringtones:add the current audio file to ringtone.
Reflash list: (when the “auto list” in “setting”menu is
set “ on”)
Settings: set the covering parameters of audio player
Preferred playlist:Memory card or Phone.
List auto generated:when it's set ON, all MP3 will
be auto added to MP3 playback list.When it's set
OFF, MP3 can be added manually.
Repeat:playback current music repeatedly.
Shuffle: Shufflly playback all MP3 in the list.
Background play:exit MP3 playback interface,
music is still playing.
Bluetooth settings:can set Bluetooth stereo output
on or off.
Bluetooth stereo headset: after pairing, the MP3
can be sent to Bluetooth headset (need the
<22>
<21>