User's Manual

4 Connectivity and Calling

The following sections explain the connectivity (pairing) and the calling procedure for RugGear

Remote Speaker Microphone.

4.1 Bluetooth Connectivity:

The RugGear RSM is wirelessly connected to your handset through Bluetooth, thus the RSM also has

a rechargeable battery inbuilt which can be recharged through the Micro USB port.

4.2 To Pair with your Phone:

Follow the instructions to pair your RugGear Bluetooth accessory with your Phone:

1. Power OFF the RugGear Bluetooth accessory.

2. Press & Hold the RugGear RSM’s power switch for 5 sec. Bluetooth accessory will enter in to

pairing state. This is indicated by Bluetooth accessory indication LED.

3. Now, enable Bluetooth on your Phone & scan for available Bluetooth devices.

4. You can find the new RugGear Bluetooth RSM with name “RTKRSM0”.

5. Select the device and get paired.

4.3 When to perform Bluetooth connection:

You will have to reconnect to RugGear RSM during the following scenarios:

1. Whenever you restart your phone.

2. Whenever you disable & then enable again the Bluetooth on your phone.

3. Whenever you disconnect only the RugGear RSM using the Bluetooth shortcut on your

phone.

4. Whenever you confirm disconnection of the connected RugGear RSM from the Bluetooth

settings screen.

In all the above mentioned cases, user has to manually connect the phone with the RugGear RSM.

Note: If the Bluetooth RSM is powered ON and not connected to any device for more than 5 minutes.

The RSM will enter power save mode & user has to power ON the RSM again and try connecting.

4.4 PTT Calling to Individuals and Groups:

Instead of using the soft PTT icon/Side PTT button on your phone, you can use the PTT button

available on the RugGear RSM for PTT application.

Note: Pressing the PTT button once on the RSM, whenever your PTT application is in

with the PTT client on your handset, only the second time you press the PTT button on the RSM will

initiate the PTT application.