User Manual

4
FRONTPANEL
1. Media player
2. LED Power indicator
3. LED Protection indicator
4. LED Clip indicator
5. Output Level meter
6. AC Power Switch
7. Microphone 1 Volume control
8. Line 1 / Microphone 2 Volume control
9. Line 2 / Microphone 3 Volume control
10. Line 3 Volume control
11. Line 4 Volume control
12. Telephone Volume control
13. Bass control
14. Treble control
15. Master Volume control
BACKPANEL
1. AC power Socket
2. AC Fuse
3. Extern Battery input 24V DC
4. Speaker output COM (-)
5. Speaker output 4Ohm (+)
6. Speaker output 8Ohm (+)
7. Speaker output 16Ohm (+)
8. Speaker output 70V (+)
9. Speaker output 100V (+)
10. Telephone input
11. MOH output (Music on Hold)
12. Line 1 / Microphone 2 Input
13. Line 2 / Microphone 3 Input
14. Dipswitch for microphone, Line, phantom
power and priority setting.
15. Microphone 1 Input
16. Line 3 Input
17. Line 4 Input
18. Line Output
19. FM Antenna
Dipswitch setting
PIN
FUNCTION
ON
OFF
Pin 1
Line 1 / Microphone 2 selection
Line 1
MIC 2
Pin 2
Line 2 / Microphone 3 selection
Line 2
MIC 3
Pin 3
Phantom Power
Open
Close
Pin 4
Priority
Tel
Mic
CONNECTING WITH BT-DEVICE
1. Activate the BT-function on your device (Mobile phone, tablet etc.) which you want to play the
music. See the operating instructions for that device.
2. Press the “MODE” button and activate BT-function in your amplifier.
3. Select “PD PBA” on your BT-device and make the BT-connection
If password is required, you can enter "0000".
Attention: The BT distance is approx. 10 meter without any barrier.