Specifications

KVM over IP Module
Chain rule
The Chain rule determines whether the access from the hosts is allowed or not. It can be
one of these two values:
 ACCEPT : access allowed
 DROP : access not allowed
The rule can be configured to apply to a particular Group level (All, User, Super,
Administrator).
When the IP-KVM receives a TCP packet, it will process the packet with the chain rule
depicted below. The process ordering is important; The packet will enter the chain rule 1
first, if meet the rule then take action directly, otherwise go to chain rule 2.
Figure 5-22 Chain Rules of IP Filtering
Check the “Enable Group based System Access Control” to edit the rules
Users can add a new IP filtering rule by setting the properties at adding line by Append
or Insert. User can remove a rule by Remove or Delete.
80 / 110