Specifications

KVM over IP Module
system from accessing the drive as long as it is redirected. This may also fail, especially if a
file on the drive is currently open. In the case of a locking failure, you will be prompted if you
want to establish the connection anyhow. This should not be a serious problem when the note
above is respected. If the write support is enabled, a drive which is not locked might be
damaged by the Drive Redirection.
With the Disconnect button, a connection via Drive Redirection connection is stopped.
Exit/Hide
If the Exit button is pressed, the Drive Redirection software is closed. If a Drive Redirection
connection is active, the connection will be closed before the application terminates.
Using the Hide to Tray button the application is hidden, but not terminated completely. That
means that an active connection will be kept active until it is closed explicitly. You can access
the software by its tray icon. The tray icon also shows whether a connection is established or
not. A double click on the icon shows the application window, or with a right click you may
access a small menu
Operation Procedures:
1. Please install Drive Redirection Software on remote computer first then run Drive
Redirection application and fill in information accordingly:
60 / 110