Specifications

KVM over IP Module
5. Open the remote console and you will see a virtual Floppy drive is created on the host
computer that connect to IP-KVM
You may create a floppy image size up to 1.44Mb. This drive would be in read-only mode and
would not allow you to write any information on this drive but copying only. This drive would be
bootable under DOS mode if the motherboard/BIOS on the host computer supporting USB
BOOTABLE function.
Notes:
1. If using other image-creator software, the output image extension file name has to be ‘img’, e.g.
floppy_vir.img.
2. The uploaded image file will be kept in the onboard memory of the IP-KVM until the end of the
current session, as you logged out, or initiated a reboot of the IP-KVM.
54 / 110