Specifications

KVM over IP Module
Phase Defines the phase for video sampling, used to control the display quality
together with the setting for sampling clock.
Horizontal Position Use the left and right buttons to move the picture in
horizontal direction while this option is selected.
Vertical Position Use the left and right buttons to move the picture in vertical
direction while this option is selected.
Reset this Mode Reset mode specific settings (Clock , Phase and Position) to
the factory-made defaults.
Reset all Modes Reset all settings to the factory-made defaults.
Save changes Save changes permanently
Undo Changes Restore last settings
• Refresh Video
Click to run this menu item for retrieving the whole video again from the controlled host
and displayed on Remote Console. In normal situation, only changed parts of video will
be packed and sent from IP-KVM, for saving network bandwidth. This function is
mainly used for troubleshooting purpose where some old video fragments are displayed
as not updated in time for some reason; for example, noise filter for VGA is setting too
large.
• Soft Keyboard
Figure 4-8 Soft Keyboard
Opens up the Menu for the Soft-Keyboard.
Show
Pops up the Soft-Keyboard. The Soft-Keyboard is necessary in case your host system
runs a completely different language and country mapping than your administration
machine.
Mapping
Used for choosing the specific language and country mapping of the Soft-Keyboard.
33 / 110