User Manual

11
PROBLEM POSSIBLE CAUSE SOLUTION
Troubleshooting
The POWER AIRFRYER XL
does not work
The appliance is not plugged in.
You have not turned the Unit on, set the
preparation time, or temperature.
Plug power cord into wall socket.
Press the Power On Button.
Select a Preset or select Time and
Temperature. Press the Power Button
again and cooking will begin.
You have probably turned off the Unit.
If you pressed the Power Button while
the Unit is cooking it will trigger the Auto
Shut-Off mode.
Press the Power On Button.
Select a Preset or select Time and
Temperature.
Press the Power Button again and
cooking will begin.
Food not cooked
The Fry Basket is overloaded. Use smaller batches for more even frying.
The temperature is set too low.
Use the Temperature Control Button
(page 5 g. 4 ) to raise the temperature
and continue cooking.
Food is not fried evenly
Some foods need to be “shaken” during
the cooking process.
See pages 9 and 10 in
this manual.
Outer Basket won’t slide
into Unit properly
Fry Basket is overloaded.
Fry Basket is not placed in Outer Basket
correctly.
Do not ll the Fry Basket above the MAX
level (see chart page 10).
Gently push Fry Basket into Outer
Basket until it “clicks.”
White smoke
coming from Unit
Too much oil being used.
Outer Basket has grease residue from
previous cooking.
Foods heavy with oil will cause dripping in
the Outer Basket. Oil in the Outer Basket
will smoke having no effect on the Unit or
the food.
Clean Outer Basket after each use.
Fresh fries are
not fried evenly
Wrong type of potato being used.
Potatoes not rinsed properly during
preparation.
Use fresh, rm potatoes.
Use cut sticks and pat dry to remove
excess starch.
Fries are not crispy
Raw fries have too much water.
Dry potato sticks properly
before adding oil.
Cut sticks smaller.
Add a bit more oil.
Error
E1 - Broken circuit of the thermal sensor
E2 - Short circuit of the thermal sensor
Call Customer Service at
1-973-287-5129