User's Manual

1. When the JC100 is powered on, the LCD will show an

FM frequency channel (for example, 88.1 Mhz).

2. Turn your car radio on and tune to an unused FM station

between 88.1 and 107.9 Mhz.

3. Use the QS button on the JC100 to change to the preset

frequency nearest the selected car radio frequency.

4. Press the "+" or "-" button to change the JC100

frequency to match the frequency selected on your car

radio. Once the frequencies are matched, the static noise

will lessen and the audio will be heard.

5. You can now dock an iPod into the JC100 (or connect a

device to the Audio In connector) and the music will play

through your vehicle speakers. Your iPod will charge

when connected to the JC100.

6. If FM interference occurs when traveling to a new area, it

may be necessary to change matched frequencies,

depending on the FM stations used in that area (repeat

steps 2-4).

Linking the FM Transmitter

Operation

MHz