Assembly Instruction

4. Attach the Bottom panel (C) to the side panel and back panel using Short bolt 1/4”x50x15mm (I) as shown.
Adjust the leveler on the feet of the unit in or out to ensure that the unit is level.
5. Attach the Top molding (A) to the Back panel and side panel using Alley key (H) and Long bolt
1/4”x100x15mm (J) as shown.
6. Attach the Top molding cover panel (B) to the Top molding (A) using Pan Head screws 8x15mm (M). Then fix
4pcs Short Phillips head screws 8x19mm (L) to back panel.