Assembly Instruction

ManualsBrandsPottery Barn ManualsOther RoomsPottery Barn Thomas Tower

pottery barn kids

THOMAS TOWER BOOKCASE

PRE-ASSEMBLY:

• Please read all instruction before beginning assembly. The illustrations provided allow for easier

assembly when used in conjunction with the assembly instructions.

• Remove all parts and hardware from box and lay out on a carpeted or scratch-free work surface, as

this will avoid damaging any parts during assembly. The shipping box provides and ideal work surface.

Do not dispose of any contents until assembly is completed to avoid accidentally discarding small parts

or hardware.

• For your safety and ease, adult assembly by two people is recommended.

• Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or

hardware.

• Use the parts and hardware lists to identify and separate each of the pieces included prior to starting

assembly.

• Note: DO not fully tighten all bolts until all parts are in place. Failure to follow these instructions may

cause the bolts to misalign during assembly.

• If using power tools to aid in assembly please use caution. Power tools can damage hardware of split

wood.

PARTS INCLUDED:

(A) Top Molding – 1pc

(B) Top molding cover panel – 1pc

(D) Right side panel – 1pc

(E) Left side panel – 1pc

(F) Shelf – 4pcs

(G) Back panel – 1pc

HARDWARE ENCLOSED:

(H) Allen Key – 1pc

(I) Short bolt 1/4”x50x15mm – 4pcs

(J) Long bolt 1/4”x100x15mm – 4pcs

(K) Long Phillips head screws 8x32mm – 16pcs

(L) Short Phillips head screws 8x19mm – 4pcs

Summary of content (4 pages)

PAGE 1
pottery barn kids THOMAS TOWER BOOKCASE PRE-ASSEMBLY: • Please read all instruction before beginning assembly. The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions. • Remove all parts and hardware from box and lay out on a carpeted or scratch-free work surface, as this will avoid damaging any parts during assembly. The shipping box provides and ideal work surface.
PAGE 2
(M) Pan Head screws 8x17mm – 8pcs (N) Bracket 48x21x10mm – 2pcs (O) Long screw 6x32mm – 2pcs (P) Short screw 6x19mm – 2pcs (Q) Nylon strap 300x12x8mm – 1pc TOOLS REQUIRED: Phillips head screwdriver (not included) Allen Key ASSEMBLY INSTRUCTIONS: 1. Lay the Right side panel (D) down as shown in the illustration below. 2. Attach 4pcs Shelf (F) to Right side panel (D) using the Long Phillips head screws 8x32mm (K). Insert the Back panel (G) as shown. 3.
PAGE 3
4. Attach the Bottom panel (C) to the side panel and back panel using Short bolt 1/4”x50x15mm (I) as shown. Adjust the leveler on the feet of the unit in or out to ensure that the unit is level. 5. Attach the Top molding (A) to the Back panel and side panel using Alley key (H) and Long bolt 1/4”x100x15mm (J) as shown. 6. Attach the Top molding cover panel (B) to the Top molding (A) using Pan Head screws 8x15mm (M). Then fix 4pcs Short Phillips head screws 8x19mm (L) to back panel.
PAGE 4
CARE INSTRUCTIONS: • Dust often using a clean, soft, dry lint-free cloth. • Blot spills immediately, and wipe with a clean, damp, cloth. • We do not recommend the use of chemical cleansers, abrasives, or furniture polish on our lacquered finish. Thank you for your purchase stores | catalog USA | www.potterybarnkids.com 1.800.290.8181 FURNITURE TIPPING RESTRAINT Young children may be injured by tipping furniture. The use of a tipping restraint is highly recommended.