Assembly Instruction

pottery barn kids

THOMAS STORAGE BED

PRE-ASSEMBLY:

Please read all instruction before beginning assembly. For your safety and ease, assembly by two-person is

recommended. Save all packing materials until assembly is complete to avoid accidentally discarding

smaller parts or hardware. Use caution when using power tools to aid in assembly. Power tools can split

wood or strip hardware if not used carefully.

PARTS INCLUDED:

A - Headboard (1)

B – Footboard (1)

C – Double side rail (1)

D – Single side rail (1)

E – Slat roll (1)

F – Storage box (3)

G – Finials (4)

HARDWARE INCLUDED:

H - Metal Bracket (3)

I –Small Phillips head screw (6)

J –Large Phillips head screw (28)

TOOLS NEEDED:

Phillips Head Screw Driver (not included)

PAGE 1
pottery barn kids THOMAS STORAGE BED PRE-ASSEMBLY: Please read all instruction before beginning assembly. For your safety and ease, assembly by two-person is recommended. Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or hardware. Use caution when using power tools to aid in assembly. Power tools can split wood or strip hardware if not used carefully.
PAGE 2
ASSEMBLY: Step #1 through#4 1. Hold double side rail (C) and single side rail (D) up to slots on the legs of the headboard (A) and insert the hooks of each side rail into the slots. Push down firmly on the top of side rails until they seat themselves over the pins inside the legs slots as shown. 2. Repeat the sample procedure with footboard (B). 3. Insert the finial (G) into the top of the bedposts and turn to tighten. 4.
PAGE 3
Step #6 through #7 6. Lay the slat roll (E) in between the side rail and use 28 Large Phillips Head screw (J) to fasten slats to the side rail with the Phillips head screwdriver. 7. Retighten all bolts and screws to make sure all are tight and bed structure is rigid. It is recommended all screws be checked from time to time for safety. Thank you for your purchase. stores | catalog | www.potterybarnkids.