Assembly Instruction

Page 2/2

2. Gently tilt the shelf (B) by lowering the other end of the shelf until it seats onto the Shelf Pegs (C). Hold the

other end in upright position and insert two Shelf Pegs (C) into the pre-drilled holes until fully inserted. Gently

lower the shelf (B) and rest the entire shelf onto the Shelf Pegs (C). (Fig 2)

3. Assembly is complete.

If the floor is not perfectly even, the furniture may not sit level. Determine which corner does not touch the ground

correctly. With two people follow these steps:

• Carefully elevate the item slightly to provide access to the levellers attached to the bottom.

• Turn the levellers in a counter-clockwise direction.

• Gently set down the piece and check stability.

• Repeat steps until the furniture sits firmly on the ground.

CARE INSTRUCTIONS:

• Dust often using a clean, soft, dry lint-free cloth.

• Blot spills immediately, and wipe with a clean, damp, cloth

• We do not recommend the use of chemical, cleansers, abrasives, or furniture polish on our lacquered

finish.

Thank you for your purchase

Stores | catalog | www.potterybarnkids.com

USA 1.800.290.8181

(Figure 2)