Assembly Instruction

pottery barn kids
thomas center cabinet base
PRE-ASSEMBLY:
• Please read all instructions carefully before beginning assembly.
• For your safety, assembly by two people is recommended.
• Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or
hardware.
• Philips head screwdriver not included.
PARTS INCLUDED: HARDWARE ENCLOSED:
(A) Shelf – 1 pc (B) Shelf Supports – 4pcs
Figure 1 Figure 2
ASSEMBLY INSTRUCTIONS:
1. Determine the desired height for the shelf (A). Note: Do not insert all the Shelf Supports at once.
Insert two Shelf Supports (B) into the pre-drilled holes on one side pushing firmly until fully inserted.
(Fig 1).
2. Gently tilt the shelf (A) by lowering the other end of the shelf until it seats onto the Shelf Supports (B).
Hold the other end in upright position and insert two Shelf Supports (B) into the pre-drilled holes until
fully inserted. Gently lower the shelf (A) and rest the entire shelf onto the Shelf Supports (B). (Fig 2)
3. Assembly is complete. (Fig 3)
The use of power tools during the assembly of this item can cause the hardware to strip or the wood
to split. Please proceed with extreme care.
Figure 3
A
A
B