Assembly Instruction

3. Attach the Long Side Panel (D) and Short Side Panel (EE) to the bottom panel (C), as shown. Insert the back panel (F)
through the U-groove on the side panel. Insert Cam Lock (G) into each of the (4) corresponding holes
on the Side Panels (D/EE) and tighten using Phillips Head Screwdriver. (Figure 4).
C
D
E
G
G
E
Figure 4
4. Place the Step 2 Assembly onto the Step 3 Assembly, as shown. Insert Cam Lock (G) into each of the corresponding
holes on the Side Panels (D/EE) and tighten using the Phillips Screwdriver. (Figure 5).
E
F
C
D
A
B
E
G
E
Figure 5
5. Use Phillips screwdriver to tighten all the Cam Locksusing the (12) Espresso Sticker (K) to cover the Cam Locks.
Page 3/5