Assembly Instruction

ASSEMBLY INSTRUCTIONS:
1. Insert (4) Wood Dowels (I) into the pre-drilled holes on each Side Panel (D) (E) and (EE) (Figure 1). Then, fasten (4)
Cam Lock Bolts (H) into the predrilled holes in each Top Panel (A), Middle Panel (B) and Bottom panel(C), using
the Phillips Head Screwdriver as shown in Figure 2. Do not over tighten the Cam Lock Bolts or the Cam Locks
will not properly engage in Steps 2, 3 and 4.
E
E
E
Figure 1. Figure 2
2. Attach the Medium Side Panel (E) to the Top Panel (A) and Middle panel (B), as shown. Insert the Cam Locks (G)
into the (4) corresponding pre-drilled holes, then fasten using the Phillips Screwdriver (Figure 3).
A
B
E
H
G
.
Figure 3
.
Page 2/5