Assembly Instruction

Page 3/5
4. Use Phillips screwdriver to tighten all the Cam Locksusing the (8) Espresso Sticker (J) to cover the
corresponding pre-drilled holes.
5. Secure the Back Panel (D) with (12) Screws (E), using the Phillips Head Screwdriver (not included)
(Figure 6).
Figure 6
BACK VIEW
6. Place the (2) Magic Wires (I) into the pre-drilled holes in the Side Panels (B) at the desired height. Insert
the Adjustable Shelf (C) (Figure 7).
Figure 7.