Assembly Instruction
Page 5/5
7. To fasten restraint strap, insert the buckle as shown in Figure 7. To release, press inward on tabs.
(Fig. 7)
8. If your floor is not perfectly even, the furniture may not sit level. Determine which corner does not touch the ground
correctly. With two people follow these steps:
• Carefully elevate the item slightly to provide access to the levelers attached to the bottom.
• Turn the levelers in a counter-clockwise direction.
• Gently set down the piece and check stability.
• Repeat steps until the furniture sits firmly on the ground. (See Fig.8)
(Fig. 8)
9. If you purchase the pottery barn kids Contoured Changing Pad, place it in the bounded area of the Changing
Table Topper (E) for use.
CARE INSTRUCTIONS:
• Dust often using a clean, soft, dry lint-free cloth.
• Blot spills immediately, and wipe with a clean, damp, cloth.
• We do not recommend the use of chemical cleansers, abrasives, or furniture polish on our lacquered finish.
• Check fasteners periodically for tightness. DO NOT over tighten. This may cause distortion or breakage.
• Parents should ensure a safe environment for the child by checking regularly, before placing the child in the
product, that every component is properly and securely in place.
Thank you for your purchase.
stores | catalog | www.potterybarnkids.com
USA 1.800.290.8181
To Release
To Fasten