Assembly Instruction
Page 4/5
5. Place the Shelf (C) onto the Shelf Supports (H). Ensure Shelf (C) is properly supported by all (4) Shelf Supports (H).
(See Fig.5)
(Fig. 5)
6. Carefully place the Topper (E) on Dresser (A), as shown in figure 6. Align the pre-drilled holes of the Topper (E) to
the pre-drilled holes at the back of the Dresser (A). Fasten Mending plate (I) to the Topper (E) and the Dresser (A)
using (3) Screws (G). Tighten with Phillips head screwdriver. Repeat with second Mending plate (I).
(Fig. 6)
6. As a safety precaution, please follow the instructions enclosed to secure the changing
table to the wall using tipping-restraint kit included.
C
E
I
G