Assembly Instruction
Page 1/2
pottery barn kids
OCTAGONAL PLAY TABLE
PRE-ASSEMBLY:
• Read all instructions before beginning assembly. The illustrations provided allow for easier assembly
when used in conjunction with the assembly instructions.
• For your safety and ease, assembly by two adults is recommended.
• Remove all part and hardware from the box and lay out on a clean, carpeted, or scratch- free work
surface. Use care as some parts or hardware may have sharp points or edges.
• Do not dispose of any contents until assembly is completed to avoid accidentally discarding small
parts and hardware.
• Use the parts and hardware lists to identify and separate each of the pieces included.
• Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may
cause the bolts misalign during assembly.
• The use of power tools for assembly is not recommended. Power tools can damage hardware or split
wood.
PARTS INCLUDED:
A. Tabletop - 1
B. Legs - 4
HARDWARE INCLUDED:
(C) 8 Allen Bolts (D) 8 Lock Washers (E) 8 Flat Washers (F) Allen Key
ASSEMBLY INSTRUCTIONS:
1. Lay the Tabletop (A) upside down on a soft work surface. Insert the Legs (B) into the Tabletop (A) as
shown in Figure 1.
Figure 1
A
B
A
B