Assembly Instruction

Right Side Panel (B)

3. Insert Wooden Dowels (K) and screw in Minifix Connecting Bolt (I) into the pre-drilled holes on the underside of

the Top Panel (E). See Fig. 3. Then, align the pre-drilled holes on Right and Left side panel (A & B) with the

assembled Wooden Dowels and Minifix Connecting Bolts (I) just assembled on the Top Panel (E). See Fig. 3.

Insert Minifix Cam (J) into the pre-drilled holes near the top of the Right and Left Side Panels (A & B). Lock Minifix

Cam (J) in place by turning with a Phillips Head Screwdriver (not included). (Fig. 3)

Two outer side holes are for

Minifix Connecting Bolt and

two inner holes for wooden

dowels.

(Fig. 3)

4. Ensure the unit is squared off before starting assembly. Attach the Back Panel (F) to the unit by inserting Screws

(L) through the pre-drilled holes of the Back Panel (F) and into the back of the unit. Loosely tighten with a Phillips

Head Screwdriver (not included). Do not fully tighten screws until all screws are in place. (Fig. 4)