Assembly Instruction

5. You can combine this cabinet with another component of the Madison system using the included Sleeve
)
Screws (H) and Sleeve Nuts (I). To do so, align the two items. Insert the Sleeve Nuts (I) into the pre-drilled
countersunk holes on the end of other component of the Madison system. Then insert Sleeve screws (H) into
the pre-drilled countersunk holes on end of cabinet. Press the Sleeve Nut (I) and tighten the Sleeve Screws (H
with Phillips Head Screwdriver (not included). (Fig. 5
)
ARE INSTRUCTIONS:
lean, soft, dry lint-free cloth.
mp, cloth.
ives, or furniture polish on our lacquered
• nd on the shelves.
Thank you for your purchase
stores s.com
Fig 5
C
• Dust often using a c
• Blot spills immediately, and wipe with a clean, da
• We do not recommend the use of chemical cleansers, abras
finish.
Do not sta
| catalog |
www.potterybarnkid
USA 1.800.290.8181