Assembly Instruction

ManualsBrandsPottery Barn ManualsBedroomPottery Barn Madison Platform Bed

Pottery barn kids

Platform Bed

Page

Thank you for your purchase

stores | catalog | www.potterybarnkids.com

PRE

ASSEMBLY:



Read all instructions before beginning assembly. The illustrations provided allow for easier assembly when

used in conjunction with the assembly instructions.



For your safety and ease, assembly by two adults is recommended.



Remove all

parts and hardware from the box and lay out on a clean, carpeted, or scratch

free work surface.

Use care as some parts or hardware may have sharp points or edges.



Do not dispose of any contents until assembly is completed to avoid accidentally discarding s

mall parts or

hardware.



Use the parts and hardware lists to identify and separate each of the pieces included.



Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may

cause the bolts to misalign during a

ssembly.



The use of power tools for assembly is not recommended. Power tools can damage hardware or split wood.

PARTS INCLUDED:

(A)

Platform Head Board

1pc

(B)

Platform Side rail

2pcs

(C)

Platform Foot Board

1pc

(D)

Platform Slats

1sets

PARTS NEEDED ( Sold Separately)

(A)

Square Long Leg

(B)

Square Short Leg

pcs

HARDWARE INCLUDED:

(F) Half Moon

washer

8pcs

(H) Ø8 x 1” Flat

Head screw

pcs

(G) Bolts M8 x

45mm

8pcs

(I) Dowel Ø8 x

30mm

8pcs

(J) 4mm Allen key

1pc

TOOLS REQUIRED:

Phillips head screwdriver (not included)

Summary of content (3 pages)

PAGE 1
Pottery barn kids Platform Bed PRE-ASSEMBLY:  Read all instructions before beginning assembly. The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions.  For your safety and ease, assembly by two adults is recommended.  Remove all parts and hardware from the box and lay out on a clean, carpeted, or scratch-free work surface. Use care as some parts or hardware may have sharp points or edges.
PAGE 2
Pottery barn kids Platform Bed ASSEMBLY INSTRUCTIONS: 1. Headboard & Footboard Installation - Insert 2pcs dowels (I) into Side Rails (B) predrilled holes. - Attach the dowel already attached on side rail (B) into headboard (A) predrilled holes. - Place half-moon washer (F) onto the bolt (G), from the oval cut out of side rail (B) insert the bolts into side rail (B) predrilled holes. Tighten using supplied Allen Key (J). Repeat same procedure to I the other side rail and Footboard (C). G F 2.
PAGE 3
Pottery barn kids Platform Bed 4. If the floor is uneven adjust the recessed levelers found underneath the leg. Adjust levelers until the platform bed Stable. 5. Platform bed ready to use. CARE INSTRUCTIONS:      Dust often using a clean, soft, dry lint-free cloth. Blot spills immediately, and wipe with a clean, damp, cloth. We do not recommend the use of chemical cleansers, abrasives, or furniture polish on our lacquered finish. Check fasteners periodically for tightness. DO NOT over tighten.