Assembly Instruction

ManualsBrandsPottery Barn ManualsHome OfficePottery Barn Kendall Storage Console

pottery barn kids

KENDALL

STORAGE CUBY

PRE

ASSEMBLY:



Please read all instruction before beginning assembly.

The illustrations provided allow for easier assembly

when used in conjunction with the assembly instructions.



Remove all parts and hardware from bo

x and lay out on a carpeted or scratch

free work

surface,

as t

his will

avoid damaging any parts during assembly. The shipping box provides and ideal work surface

Do not dispose

of any contents until assembly is completed to avoid accidentally discarding s

mall parts or hardware.



For your safety and

ease, adult assembly

by t

wo people is recommended.



Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or

hardware.



Use the parts and hardware lists to identify

and separate each of the pieces included prior to starting

assembly.



Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may cause the

bolts to misalign during assembly.



If using power tools to aid in as

sembly please use caution. Power tools can damage hardware or split wood.

PARTS INCLUDED:

(

)

Top

(

)

Left panel

(

)

Right panel

(

)

Top f

ront rail

(E) Rail

–

1pc

(

)

Fixed shelf

(G) Fixed shelf 2

–

1pc

(

)

Back penal

–

1pc

TOOLS

REQUIR

ED:

Phillips head screwdriver (not included)

HARDWARE

ENCLOSED

(

)

1/4

1/4”

Bolts

pcs

(

) Washer 1/4mm

–

pcs

Summary of content (5 pages)

PAGE 1
pottery barn kids KENDALL STORAGE CUBY PRE-ASSEMBLY:  Please read all instruction before beginning assembly. The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions.  Remove all parts and hardware from box and lay out on a carpeted or scratch-free work surface, as this will avoid damaging any parts during assembly. The shipping box provides and ideal work surface.
PAGE 2
(K) Spring washer 1/4mm – 6pcs (L) #3x20mm – 22pcs (M) 4mm Allen Key – 1pc ASSEMBLY INSTRUCTIONS: 1. Position the Side panel (B) and the fixed shelf 2 (G) exactly as shown (Fig.1) Align the pre-drilled holes on the Side panel (B) with the pre-drilled holes on the cleat on the fixed shelf 2 (G).
PAGE 3
2. Position the top front rail (D) & rail (E) exactly as shown (Fig.2). (Fig. 2) E D 3. Position the Panel (C) and the assembled frame (assembled in step 1) exactly as shown. (Fig.3) Align the predrilled holes on the Side panel (C) with the pre-drilled holes on the assembled frame, insert the Washer (J), Spring washer (K) and 1/4x 1-1/4” Bolt (I) through pre-drilled holes on the side panel. Tightening with the Allen key (M) provided. (Fig.
PAGE 4
. Attach the Top (A) onto the assembled frame (assembled in step 3) by inserting the pre-attached wooden dowels on the top horizontal rails of the side panels into the pre-drilled holes on the Top (A). Insert Allen Bolts into the pre-drilled holess at both ends of the Top. Once all bolts are in place, fully tighten them using the 4mm Allen key (M) provided. (Fig. 4) A J K I 5. Attach the Back Panel (H) to the back of the unit.
PAGE 5
6. Adjust the Adjustable Levelers on the bottom of the Legs by loosening or tightening them so the Kendall Storage Cuby sit evenly on floor. (Fig. 6) CARE INSTRUCTIONS:  Dust often using a clean, soft, dry lint-free cloth.  Blot spills immediately, and wipe with a clean, damp, cloth.  We do not recommend the use of chemical cleansers, abrasives, or furniture polish on our lacquered finish. Thank you for your purchase stores | catalog | www.potterybarnkids.